Selasa, 27 Maret 2018

Sponsored Links

JDM Nissan Fairlady Z32 VG30-DETT Engine, 5 Speed Transmission ...
src: i.ytimg.com

The VG engine family consists of V6 piston engines designed and produced by Nissan for several vehicles in the Nissan lineup. The VG series started in 1983 becoming Japan's first mass-produced V6 engine. VG engines displace between 2.0 L and 3.3 L and feature an iron block and aluminum heads. The early VG engines featured a SOHC arrangement with 2 valves per cylinder. A later revision featured a slightly different block, and a DOHC arrangement which utilized 4 valves per cylinder and Nissan's own version of variable valve timing for a smoother idle and more torque at low to medium engine speeds. The block features a single piece main bearing cap. The production blocks and production head castings were used successfully in the Nissan GTP ZX-Turbo and NPT-90 race cars which won the IMSA GT Championship three years in a row.

The VG series engine found its way into thousands of Nissan vehicles, starting in 1984. The VG design was retired in 2004, by which time all V6-powered Nissans had switched to the VQ engine series.


Video Nissan VG engine



VG20E

The VG20E is a 2.0 L SOHC (1,998 cc) engine produced from 1984 on. It produces between 115 PS (85 kW) and 125 PS (92 kW) net. In the earlier gross rating system, early eighties' models claim 130 PS (96 kW).

Applications:

  • 1983-1987 Nissan Gloria/Nissan Cedric Y30
  • 1987-1999 Nissan Gloria/Nissan Cedric Wagon/Van Y30
  • 1986-1988 Nissan Bluebird Maxima U11
  • 1986-1992 Nissan Leopard F31
  • 1987-2002 Nissan Gloria/Nissan Cedric Y31
  • 1991-1995 Nissan Gloria/Nissan Cedric Y32
  • 1996-2002 Nissan Gloria/Nissan Cedric Y33
  • 1997-1999 Nissan Leopard JY33

Maps Nissan VG engine



VG20ET

The VG20ET was based on the VG20E, but with an added turbocharger. The VG20ET produces 170 hp (130 kW). This SOHC motor debuted at the same time as the VG20E. Also coming with the Y30, this motor was known as the "Jet Turbo", and came with the Nissan Leopard models XS, and XS-II Grand Selection. Contrary to the VG30ET that came out in the US, the VG20ET came with an intercooler in certain models to push the horsepower output to 155 hp (116 kW), a great jump from the normally aspirated VG20E. The turbo included with the VG20ET had two different settings. At low speeds, the turbo's wastegate would stay closed improving the response at low rpm. At high speeds, the flap would stay open, decreasing resistance and increasing exhaust flow. At its maximum flow, the flap would open at an angle of 27 degrees, while the A/R ranged from 0.21-0.77. Being that the VG20ET had a short stroke (78x69.7 mm), it was thought to have insufficient low end torque. Nevertheless, the VG20ET was a great improvement over the VG20E.

It was used in the following vehicles:

  • 1984-1989 Nissan 200Z (Z31)
  • 1984-1989 Nissan 200ZG (Z31)
  • 1984-1989 Nissan 200ZS (Z31)
  • 1984-1989 Nissan Laurel Medallist (C32)
  • 1986-1988 Nissan Leopard (F31)
  • 1984-1990 Nissan Bluebird (PU11)

JDM VG30DE ENGINE ONLY â€
src: jdmengineworld.com


VG20DET

The VG20DET is an DOHC 2.0 L (1,998 cc) engine with a ceramic turbocharger and intercooler. It has a bore of 78 mm and a stroke of 69.7 mm and produces 210 PS (154 kW). This engine features NVTCS (Nissan's Valve Timing Control System).

It began use in 1987 in the following vehicles:

  • 1987--1999 Nissan Gloria/Nissan Cedric (Y31)
  • 1988.08--1992.06 Nissan Leopard (F31)

NISSAN NAVARA 2003 3.0 V6, VG30, D22, 2WD NOW DISMANTLING 02-9724 ...
src: i.ytimg.com


VG20P

The VG20P is the Autogas (Liquified petroleum gas) version of the VG20. It produces 99 PS (73 kW; 98 hp) at 5,600 rpm and 149 N?m (110 lb?ft) at 2,400 rpm. Later versions (2004-2005) produce 105 PS (77 kW; 104 hp) at 6,000 rpm and 152 N?m (112 ft?lbf) at 2,400 rpm. It is an overhead cam, twelve-valve engine.

It is used in the following vehicles:

  • 1987-2005 Nissan Cedric Y31

ASCO - MLS Cylinder Head Gasket Set - Nissan SOHC VG Engines ...
src: store.acadianasportscars.com


VG30S

The VG30S is a 3 L (2,960 cc) SOHC twelve-valve engine with an electronic carburettor that produces 148 PS (109 kW; 146 hp) at 4,800 rpm and 234 N?m (173 ft?lbf) at 3,600 rpm. This engine was mainly offered in export markets with more lenient environmental regulations, such as the Middle East and Africa.

It is used in the following:

  • Nissan Cedric Y31
  • Nissan Laurel C32

Nissan VG engine Top #6 Facts - YouTube
src: i.ytimg.com


VG30i

The VG30i is a 3 L (2,960 cc) engine produced from 1986 through 1989. It features a throttle body fuel injection system. It has a long crank snout, a cylinder head temperature sensor positioned behind the timing belt cover, and a knock sensor in the cylinder valley (on California models only). It produces 140 PS (103 kW; 138 hp) at 4,800 rpm and 226 N?m (167 ft?lbf) at 2,800 rpm.

Applications:

  • 1986-1989 D21 Hardbody Truck
  • 1986-1989 Nissan Pathfinder/Nissan Terrano

Terrific Patrol Safari Engine Diagram 1987 Ideas - Best Image ...
src: txautonet.com


VG30E

The 3.0 L (2,960 cc) VG30E produced 153 hp (114 kW) and 182 lb?ft (247 N?m). Bore is 3.43 in (87 mm) and stroke is 3.27 in (83 mm). In 300ZX form, it produced 160 hp (120 kW) and 173 lb?ft (235 N?m). On April 1987 the "W" series VG30 was released, adding 5 horsepower but leaving torque unchanged. In 1989, the Maxima received the 160 hp (120 kW) rating, but also used a variable intake plenum improving torque to 182 lb?ft (247 N?m) @3200 rpm.

It was used in the following vehicles:

  • 1984-1989 Nissan 300ZX (160 hp/165 hp) 9.0:1 compression ratio for NA
  • 1984-1989 Nissan Laurel
  • 1985-1994 Nissan Maxima (160 hp)
  • 1987-1988 Nissan 200SX SE
  • 1988-1996 Nissan Homy & Caravan series E24
  • 1990-1992 Infiniti M30/Nissan Leopard
  • 1990-1997 D21 Hardbody Truck
  • 1990-1995 Nissan Pathfinder/Nissan Terrano
  • 1992-1999 Nissan Gloria/Nissan Cedric (179 hp)
  • 1993-1998 Nissan Quest/Mercury Villager (modified to become a non-interference design)

Nissan Pathfinder VG30 Back of Engine Explained - YouTube
src: i.ytimg.com


VG30ET

The 3.0 L (2,960 cc) VG30ET was available in early production with a single Garrett T3 turbocharger (6.8 psi (0.47 bar)) and a 7.8:1 compression ratio. The USDM and JDM version produced 200 hp (149 kW) and 227 lb?ft (308 N?m). European versions produced 230 hp (172 kW) and 252 lb?ft (342 N?m). When "W"-Series VG30 was released in April 1987, horsepower was increased to 205 hp (153 kW). All 1987 models featured a T3 turbocharger (6.8 psi (0.47 bar)). In 1988 the compression ratio was changed to 8.3:1 and turbocharged with a single Garrett T25 turbocharger (4.5 psi (0.31 bar)) to reduce turbo lag. No VG30ET was ever factory equipped with an intercooler as they were intended for quick throttle response and featured low boost pressure.

It was used in the following vehicles:

  • 1984-1989 Nissan 300ZX Turbo (Z31)
  • Nissan Leopard
  • Nissan Gloria/Nissan Cedric (230 PS)
  • Nissan GTP ZX-Turbo Racecar (non-production)

VG30 DE DOHC Engine only 300ZX 90-95 - Nissan & Infiniti
src: www.jdmquality.com


VG30DE

The first quad cam 24 valve VG30DE engine was developed for the 1985 MID4 concept. The 3.0 L (2,960 cc) VG30DE produces 190 hp (140 kW) to 222 hp (166 kW) and 198 lb?ft (268 N?m). Bore is 3.43 in (87 mm) and stroke is 3.27 in (83 mm). Original Japanese market units claimed 185 PS (136 kW). There are two versions of the VG30DE. The first was introduced in 1986 on the Japanese 300ZR (Z31) and Nissan Leopard F31, and was never sold in North America. The VG30DE has two throttle bodies facing the front of the vehicle (Nissan 300ZX and Fairlady Z) or two throttle bodies to the left (sedans and 300ZR). It was also installed with NVCS, an early form of variable valve timing.

Early VG30DE's used large oval intake ports, and round exhaust ports, though the flange was similar to the SOHC VG engine, bolt spacing was slightly different. Late VG30DE's used slightly smaller oval intake ports, and oval exhaust ports. The bolt spacing was shared with the round-port variant from earlier years.


It is used in the following vehicles:

  • 1985 Nissan MID4 Concept (Not-Production)
  • 1986-1989 Nissan 300ZR Z31 (190 hp)
  • 1990-1997 Nissan 300ZX Z32 (222 hp)
  • 1989-2000 Nissan Fairlady Z Z32 (222 hp)
  • 1986-1992 Nissan Leopard F31 (190 hp)
  • 1992-1998 Infiniti J30/Nissan Leopard J Ferie (210 hp)
  • 1992-1995 Nissan Gloria and Cedric (190 hp)
  • 1989-1991 Nissan Cima (190 hp)

File:Nissan VG30ET engine (1984 300ZX Turbo).jpg - Wikimedia Commons
src: upload.wikimedia.org


VG30DET

The VG30DET is a 3.0-liter (2,960 cc), 24-valve, quad-cam, VTC-equipped engine equipped with a T3 (Nissan N1 Type) 4-bolt Garrett Turbo running between 7.5 and 11.5 psi. Generating up to 255 hp (190 kW) and measuring 236 lb?ft (320 N?m) depending on the production year and application.

While this engine is similar to the VG30DE, it used different heads and inlet manifold. Contrary to popular belief, it was not available in the Nissan 300ZR model - the 300ZR only had an early version of the VG30DE (no turbo). The engine was available in the Cedric, Gloria, Cima and Leopard chassis. It is a single-turbo engine that was used from 1987 through 1995 in the Japanese market, and the predecessor for the VG30DETT engine.

It was available in the following vehicles:

  • Nissan Cedric Y32 (1991-1994)
  • Nissan Gloria
  • Nissan Cima FY31, FY32, FY33 (1988-2001)
  • Nissan Leopard

JDM VG33E ENGINE ONLY â€
src: jdmengineworld.com


VG30DETT

The production 3.0 L (2,960 cc) VG30DETT produces 300 hp (224 kW) and 283 lb?ft (384 N?m) when mated with a five-speed manual transmission. When mated with the four-speed automatic transmission, it was rated at 280 hp (209 kW) and 283 lb?ft (384 N?m) of torque. The VG30DETT was first developed for the 1987 MID4-II concept and produced 330 PS (240 kW). It was the last of Nissan's four-valve, belt driven DOHC turbocharged engines put into production, being preceded by the CA18DET and RB20DET.It is equipped with hybrid twin T22/TB02 turbochargers which were developed exclusively for Nissan, twin intercoolers, and NVTCS (Nissan's Valve Timing Control System). The VG30DETT utilizes an iron block with aluminum heads. Domestic Japanese market cars claimed 280 PS (206 kW), as the Japanese automobile manufacturers were limited to that number. It is used in the following vehicles:

  • 1987 Nissan MID4-II Concept (non-production)
  • 1989-2000 Nissan Fairlady Z Twin Turbo (Japan)
  • 1990-1996 Nissan 300ZX Twin Turbo (US)

Pitstop Performance Pitstop Ultimate Engine Rebuild Longblock ...
src: conceptzperformance.com


VG33E

The VG33E is a 3.275 litres (199.9 cu in) version built in Japan. Bore is 91.5 mm (3.60 in) and stroke is 83 mm (3.3 in). Output is 170 hp or 180 hp (134 kW) at 4,800 rpm (depending on year/vehicle) with 202 lb?ft (274 N?m) of torque at 2,800 rpm. It has a cast iron engine block and aluminum SOHC cylinder heads. Compression ratio is 8.9:1. It has sequential fuel injection, two valves per cylinder with self-adjusting hydraulic followers, forged steel connecting rods, one-piece cast camshafts, and a cast aluminum lower intake manifold with either a cast aluminum, or plastic/composite plenum (upper intake manifold). Due to its proven reliability, this engine is still in production today in the Nissan Paladin (rebadged as Dongfeng Oting) produced by Zhengzhou Nissan for the Chinese market.

It is used in the following vehicles:

  • 1996-2000 Nissan Pathfinder
  • 1996-2004 Nissan Pathfinder In Australian Models
  • 1997-2000 Infiniti QX4
  • 1999-2004 Nissan Frontier
  • 2000-2004 Nissan Xterra
  • 1997-2002 Nissan Elgrand
  • 1999-2002 Nissan Quest/Mercury Villager
  • 1999-2004 Nissan Paladin

90-97 Nissan 300ZX 89-00 Fairlazy Z Z32 VG30DE 3.0 Liter V6 Non ...
src: cdn.shopify.com


VG33ER

The 3.3 L (3,275 cc) VG33ER is a supercharged version of the VG33, and produces 210 hp (157 kW) at 4,800 rpm with 246 lb?ft (334 N?m) of torque at 2,800 rpm.

It is used in the following vehicles:

  • 2001-2004 Nissan Frontier SC
  • 2002-2004 Nissan Xterra SC

IPP - Import Parts Pro IPP Long Block Engine Rebuild, Stage 3 ...
src: conceptzperformance.com


VG33ET (Non-production)

The 3.3 L (3,275 cc) VG33ET is a turbocharged version of the VG33, which was not produced by Nissan. It is commonly made by using VG30ET exhaust manifolds, intake manifolds, injectors, ECU etc. on the VG33 long block. The VG30 cams can be used to produce more top end power, though doing so makes the engine interference.


How to remove Nissan Lower intake manifold & knock sensor Vg33e ...
src: i.ytimg.com


See also

  • List of Nissan engines
  • Nissan

JDM VG33E ENGINE ONLY â€
src: jdmengineworld.com


References


Nissan VG33E/VQ33E Engine Rocker Arm/Hydraulic Lifter Valvebody ...
src: i.ytimg.com


External links

  • Vee Six Zed: Forget the relatively easy task of dropping a RB-series six into a classic Zed - try the quad-cam VG30DET for a challenge! at AutoSpeed Issue: 368 16 February 2006 by Michael Knowling, Pix by Julian Edgar
  • The Nissan VG30DETT - Inside its development AutoSpeed Issue: 469. 28 February 2008. By Julian Edgar.

Source of the article : Wikipedia

Comments
0 Comments